(PUBG) How to FIX: Your PC Ran Into a Problem and Needs to Restart

Your PC Ran into a Problem & Needs to Restart? If you're experiencing an annoying issue, you have come to the right place, for this article explains the best way to fix the blue screen error of death. Whether your PC can boot into Safe Mode or not, You will be given a good suggestion.

Methods :

01. What Caused BSOD?

02. Way A: Your PC Can Boot into the Safe Mode

03. Way B: Your PC Cannot Boot into the Safe Mode

04. Your PC Ran Into a Problem

05. Disable Elan Service

Sometimes when booting your Windows 10, you see a blue screen that tells that your PC ran into a problem and needs to restart. The same screen appears if you try to reboot again. This problem is referred to as BSOD (blue screen error of death) as shown below:

"Your PC ran into a problem and needs to restart. We're just collecting some error info, and then we'll restart for you."

"Your PC ran into a problem that it couldn't handle and now it needs to restart. You can search for the error online."

Along with the message is the specific stop code that can be:

If you have no idea what to do when your PC ran into a problem and needs to restart frozen, don't worry, for you may get some clue after reading this article.

What Caused BSOD?

To be completely honest, It's hard to specify the cause of the blue screen of death. regularly, your PC ran into a problem Windows 10 is caused by a hardware issue or hardware driver issue. & when Windows encounters a "stop error", Windows is continuously crashing & you get a blue screen.

However, Your computer has become stuck in a problem loop, which can be caused by the following:

* Corrupted system file.

* The System32 folder contains a registry file that is deleted.

* Overheating problem.

* RAM is running at a higher percentage than the OS can accept.

* Virus attack.

* Forceful shutdown.

It's hilarious that Windows recommends restarting, but you keep receiving the same blue screen after doing so. In all seriousness, the BSOD error can result in data loss. As a result, it is critical to recover lost data as well as find a solution to the blue screen of death.

Way A: Your PC Can Boot into the Safe Mode

If your computer is still capable of booting into Safe Mode, you got multiple ways to fix your PC ran into a problem, and need to restart stuck. Please read the solutions to blue screen errors carefully and then pick up the ones you think are reliable. & We hope you don't go to the final one.

Tip: How to enter the Safe Mode when Windows 10 can't boot? In short, You will require the assistance of a Windows recovery drive or a Windows installation disk. To obtain detailed instructions, Ways to Boot into Safe Mode in Windows 10.

Method 1. Update the Drivers

A faulty driver can also result in a "your PC ran into a problem and needs to restart" error. Please ensure that all of your device drivers are up to date. To accomplish this, you will need professional driver update tools to assist you in Safe Mode.

Method 2. Uninstall Recently Installed Applications

A recently installed application could be causing the high RAM, further leading to blue screen error of death. At this time, Please keep in mind what programs you've recently installed & then your PC ran into a problem and needs to restart.

When you are in Windows 10 Safe Mode, go to the Start menu and select Programs and Features. Then look for and uninstall any recently installed programs.

Tip: While uninstalling an application in Windows Safe Mode, you are likely to encounter an error message saying "The Windows Installer Service could not be accessed." At this time, you just need to do the followings:

01. Run CMD as an administrator

02. Type REG ADD "HKLM\SYSTEM\CurrentControlSet\Control\SafeBoot\Minimal\MSIServer" /VE /T REG_SZ /F /D "Service"and press Enter.

03. Type net start msiserver.

04. Try uninstalling the program again.

Method 3. Modify the Memory Dump Setting

This method is particularly useful when the BSOD appears "your PC ran into a problem and needs to restart memory management":

01. In Safe Mode, right-click This PC on the desktop and select the Properties option.

02. Select Advanced system settings on the left of the System tab.

03. Click on the Advanced tab on the upper side of the Properties window. Then click Settings in the Start-up and Recovery column.

04. Under System failure topic, uncheck Automatically restart; under Write debugging information, click on the drop-down menu and select Complete memory dump option.

05. Click on the OK button and allow the restart.

06. Check to see if you still have the error "Your PC ran into a problem and needs to restart."

Method 4. Run System File Checker

01. In Windows 10 Safe Mode, run Command Prompt as Administrator.

02. In the popped-up command line window, type sfc /scannow and hit the Enter key. Let the system file checker finish and then reboot your PC and see if the blue screen error appears.

Tip: This can also be done with the help of a Windows installation disk. To get into the Command Prompt, follow the path Repair your computer ➡️ Troubleshoot ➡️ Advanced ➡️ Command Prompt.

Method 5. Update Windows

There's a good chance it'll happen your PC ran into a problem and needs to restart frozen can be fixed by Windows update. Now, follow the instructions below:

01. At the Cortana search box, type update and choose to Check for updates from the best match.

02. Right-click the Check for updates button and let Windows check for any updates available now.

03. Install all updates and restart your PC.

Way B: Your PC Cannot Boot into the Safe Mode

If you can't get your computer to boot into Safe Mode, you may have to try these suggestions to perform your PC ran into a problem and needs to restart Windows 10 fix:

Method 1. Run Startup Repair

To assist in the resolution of Windows boot issues, Windows provides a Startup Repair tool. You will, however, require the assistance of a Windows recovery drive or a Windows installation disk.

01. To boot your computer, use a Windows recovery disk or a Windows installation disk.

02. When you see the option to install Windows, click Repair your computer instead. Then choose to Troubleshoot ➡️ Advanced Options ➡️ Startup Repair.

03. Select the target operating system to fix. Windows will start the repair process and then reboot.

Method 2. Perform System Restore

If you have created system restore points before, you should be able to roll your OS to a previous state when the applications & the registry files are still working in good condition.

01. Also, go to the Windows recovery environment.

02. Select Troubleshoot ➡️ Advanced options➡️ System Restore.

03. Choose an account to continue (It's possible that you'll have to enter the password as well).

04. Click Next to continue.

05. Now choose a restore point that will restore Windows back to the date when you were not getting the blue screen error and click Next to go on.

06. Press Finish and then Yes to restore Windows.

When the System Restore tool has finished its work, restart Windows. As a result, if your PC had a problem, Windows 10 should have been fixed by now. However, if no restore point is available, proceed to the next step.

Method 3. Reset or Reinstall Windows

In case you still have this issue, we advise you to reset/reinstall Windows OS. But before you start, Because system resetting/reinstallation can clean the original system partition, you'll need to recover some important files saved there.

Your PC Ran Into a Problem

What does your PC ran into a problem and needs to restart mean?

The issue of your PC ran into a problem and needs to restart is one of the Blue Screen of Death errors. It is a potential of a system crash. The issue of your PC ran into a problem and needs to restart always caused by the hardware issue, Issues with drivers, corrupted system files, registry file loss, overheating, virus attack, forced shutdown, and others.

What does it mean when it says your PC ran into a problem?

When experience the Blue Screen of Death error of your PC ran into a problem, it means that there is a problem with your hardware or the drivers. Or the file system is corrupted, the registry files in the System 32 folder are deleted, your computer is overheating, your computer is attacked by a virus, or the computer doesn’t be shut down correctly, etc.

How do I fix Windows 10 ran into a problem and needs to restart?

Update drivers.
Uninstall recently installed applications.
Modify the memory dump settings.
Run System File Checker.
Update Windows.
Run Startup Repair.
Perform System Restore.
Reset or reinstall Windows.

Why does my PC keep saying it needs to restart?

If your computer keeps telling you that it needs to restart, it means that there may be some issues with your hardware or drivers on your computer. The file system may be corrupted, your computer may be overheating, A virus has infected your computer, or the registry files on the System 32 folder are deleted by accident. When all the above situations occurred on your computer, you may encounter the issue that the PC keeps saying it needs to restart.

Disable Elan Service

The genuine ELAN.exe file is a component of Alcatel Microelectronics' ELAN software. ELAN.exe is an executable file that is associated with ELAN, an Alcatel Microelectronics product. This is a non-essential Windows process that can be turned off if it is known to cause problems.

Follow the Steps

01. Search System Configuration

02. Click the Service

03. UnCheck the Elan Service

04. Click Apply

(PUBG) How to FIX: Your PC Ran Into a Problem and Needs to Restart | INACCESSIBLE_BOOT_DEVICE